ABC Clean Agent Fire Extinguisher (Modular Type)
A fire in an office can destroy expensive equipment and leave you without the means to carry on running your company, or burn down your house into ashes. Powder extinguishers are especially dangerous for computers, servers, printers and other electronics because they leave a lot of residue behind which is brittle and causes them to rust out far quicker than they otherwise would. Our Clean Agent fire extinguishers use a much gentler method of putting out fires which will not damage sensitive electronic equipment. They contain a type of Chemicals that are very similar to ones that NASA uses at their headquarters!
Description
A modular fire extinguisher is designed in such a way to extinguish the fire quickly and efficiently, especially in unoccupied rooms or areas where a fire could cause extensive damage if not detected and extinguished in time. The modular type of fire extinguisher consists of a hazard-free clean agent, which keeps your article safe and intact in case of fire. This type of fire extinguisher is ideal for protecting the computer area, ATM center, server room, fuel, and flammable liquid storage, automobile garages, marine engines, welding benches, domestic gas storage, particularly for hotels and the places where water damage cannot tolerate.
Its automatic activation feature reduces the risk of human error and can be easily installed in any ceiling, with no need for special tools or maintenance. These extinguishers are fitted with a 90% concentration of Mono Ammonium Phosphate (MAP) which is effective against virtually all classes of fires.
Extinguishing agent- ABC Dry Chemical agent is the only one of the dry chemical agents that provides Class A fire suppression. It is a monoammonium phosphate based dry chemical containing chemical additives, and produced by an exclusive chemical process.
Additional information
| Weight | 2 Kg, 4 Kg |
|---|---|
| Variation | Cartraidge, Stored Pressure |
Technical Specifications
| Capacity | 2 kgs. | 5 kgs. | 10 kgs. | 15 kgs. |
| Area Protection in m2 | 1-1.5 | 3.5 – 4 | 7-8 | 8-10 |
| Operation Time | 8-10 Seconds | 10 15 Seconds | 15 – 20 Seconds | 18 – 23 Seconds |
| Working Pressure | 7 to 15 Kgf / cm2 | 7 to 15 Kgf / cm2 | 7 to 15 Kgf / cm2 | 7 to 15 Kgf / cm |
| Volume Profection | 3m2 | 8m? | 15m2 | 20m2 |
| Hanging vertically above risk | 1.5 m | 1.5 – 2 m | 1.75 – 2.2 m | 2-3m |
| Operating Temperature | 68°C /79°C / 93°C | 68°C/ 79°C/93°C 35 Kgf / cm | 68°C / 79°C/ 93°C | 68°C/79°C/ 93°C |
| Test Pressure | 35 Kgf / cm | 35 Kgf / cm? | 35 Kgf / cm? | 35 Kgf / cm? |
| Operating Valves | Automatic | Automatic | Automatic | Automatic |
| Propellent | Dry Nitrogen | Dry Nitrogen | Dry Nitrogen | Dry Nitrogen |
| Anti Corrosive treatment | Phosphating (7 Tanks) | Phosphating (7 Tanks) | Phosphating (7 Tanks) | Phosphating (7 Tanks) |
| Exstinguisher Media | Dry Powder / HFC 236 fa | Dry Powder / HFC 236 fa | Dry Powder / HFC 236 fa | Dry Powder / HFC 236 fa |
| Painting | Epoxy Polyester Powder Coating | Epoxy Polyester Powder Coating | Epoxy Polyester Powder Coating | Epoxy Polyester Powder Coating |
| Tare Weight (Approx.) | 1.9 kgs. | 3.4 kgs | 5.2 kgs. | 7.5 kgs. |
| Gross Weight (Approx.) | 3.9 kgs. | 8.4 kgs | 15.2 kgs. | 22.5 kgs. |
